+- Maui Forums (https://forums.mauilinux.org)
+-- Forum: Maui Support (https://forums.mauilinux.org/forumdisplay.php?fid=74)
+--- Forum: Hardware (https://forums.mauilinux.org/forumdisplay.php?fid=85)
+--- Thread: Use Skylake internal gfx and dedicated gfx card? (/showthread.php?tid=24187)
Use Skylake internal gfx and dedicated gfx card? - RaimundD - 25th December 2016
Hi,
I have a NVIDIA card and a skylake with internal gfx (on chip). I am using the NVIDIA card as gfx card.
Is it possible to use the skylake gfx processor as CUDA or similar computing chip? Without the NVIDIA card I used to run the BOINC client on the chip but if the dedicated gfx card is installed the intel gfx chip is no longer recognized?
Thanx
Raimund
RE: Use Skylake internal gfx and dedicated gfx card? - AJSlye - 26th December 2016
This is normal, the firmware (BIOS, UEFI) of the main board will automatically disable the on board chip as soon as a card is inserted in the expansion slot.
RE: Use Skylake internal gfx and dedicated gfx card? - RaimundD - 26th December 2016
(26th December 2016, 7:23)AJSlye Wrote: This is normal, the firmware (BIOS, UEFI) of the main board will automatically disable the on board chip as soon as a card is inserted in the expansion slot.
Thanx,
but is it possible to change this behavior and use the on board chip anyway?
Raimund
RE: Use Skylake internal gfx and dedicated gfx card? - AJSlye - 26th December 2016
No, not really. It's usually a hardware, as well as a software, limitation or issue.
You would have to look this up in the main boards documentation.