+- Maui Forums (https://forums.mauilinux.org)
+-- Forum: Maui Support (https://forums.mauilinux.org/forumdisplay.php?fid=74)
+--- Forum: Installation (https://forums.mauilinux.org/forumdisplay.php?fid=83)
+--- Thread: From plasma 5.10.2 to plasma 5.12.3 (/showthread.php?tid=24735)
From plasma 5.10.2 to plasma 5.12.3 - smoreau - 21st March 2018
On two different machines I wanted to use the backport servers to update plasma from 5.10.2 to 5.12.3. in each case the download was OK. But at reboot I cant go further than the following screen.
See the attached file.
Any suggestions ?
Thanks
SM
RE: From plasma 5.10.2 to plasma 5.12.3 - smoreau - 22nd March 2018
Confirmed, do not update Maui 17.06 using xenial backport and neon backport.
The only sequence which worked was
5.10.2 to 5.11.3 to 5.12.1 then 5.12.2 and 5.12.3.
SM
RE: From plasma 5.10.2 to plasma 5.12.3 - smoreau - 29th March 2018
(22nd March 2018, 9:39)smoreau Wrote: Confirmed, do not update Maui 17.06 using xenial backport and neon backport.
The only sequence which worked was
5.10.2 to 5.11.3 to 5.12.1 then 5.12.2 and 5.12.3.
SM
See below the message at the end of the installation process.
SM
RE: From plasma 5.10.2 to plasma 5.12.3 - smoreau - 29th March 2018
sudo apt-get install -f resolved the problem after the installation.
SM