I cannot access my Root file system in Dolphin.
If I click on my hard drive under Devices, click on Root under Places or click on / in the Location Bar it locks up my Macbook and requires a hard shut down.
I can move the pointer but can't select anything with it or use my keyboard.
I tried to open Dolphin using kdesudo Dolphin but it does the same thing. Any ideas?
Edit- I forgot to say that I applied the updates for Maui and thought that that had broken something, so I did a fresh install and it turned out not to be the case. I'm at a lose.
Here are the specs of my machine:
If I click on my hard drive under Devices, click on Root under Places or click on / in the Location Bar it locks up my Macbook and requires a hard shut down.
I can move the pointer but can't select anything with it or use my keyboard.
I tried to open Dolphin using kdesudo Dolphin but it does the same thing. Any ideas?
Edit- I forgot to say that I applied the updates for Maui and thought that that had broken something, so I did a fresh install and it turned out not to be the case. I'm at a lose.
Here are the specs of my machine:
Code:
Kernel: 4.4.0-34-generic x86_64 (64 bit gcc: 5.3.1)
Desktop: KDE Plasma 5.7.3 (Qt 5.7.0) Distro: Ubuntu 1 xenial
Machine: System: Apple (portable) product: MacBookPro9 2 v: 1.0
Mobo: Apple model: Mac-6F01561E16C75D06 v: MacBookPro9 2
Bios: Apple v: MBP91.88Z.00D3.B0D.1602221713 date: 02/22/2016
CPU: Dual core Intel Core i5-3210M (-HT-MCP-) cache: 3072 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9976
clock speeds: max: 3100 MHz 1: 1329 MHz 2: 1222 MHz 3: 1309 MHz 4: 1926 MHz
Graphics: Card: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0
Display Server: X.Org 1.18.3 driver: intel Resolution: 1280x800@60.22hz
GLX Renderer: Mesa DRI Intel Ivybridge Mobile
GLX Version: 3.0 Mesa 11.2.0 Direct Rendering: Yes
Audio: Card Intel 7 Series/C210 Series Family High Definition Audio Controller
driver: snd_hda_intel bus-ID: 00:1b.0
Sound: Advanced Linux Sound Architecture v: k4.4.0-34-generic
Network: Card-1: Broadcom NetXtreme BCM57765 Gigabit Ethernet PCIe
driver: tg3 v: 3.137 bus-ID: 01:00.0
IF: enp1s0f0 state: down mac: <filter>
Card-2: Broadcom BCM4331 802.11a/b/g/n driver: wl bus-ID: 02:00.0
IF: wlp2s0 state: up mac: <filter>
Drives: HDD Total Size: 256.1GB (4.3% used) ID-1: /dev/sda model: M4 size: 256.1GB
Partition: ID-1: / size: 56G used: 6.5G (13%) fs: ext4 dev: /dev/sda4
ID-2: swap-1 size: 4.10GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID: No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors: System Temperatures: cpu: 58.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 208 Uptime: 11 min Memory: 769.3/3857.7MB
Init: systemd runlevel: 5 Gcc sys: 5.4.0 Client: Shell (bash 4.3.461) inxi: 2.2.35