Maui
Board Index divider Search Member List Help
Hello There, Guest! Login Register
Login
Username:
Password: Lost Password?
 
Maui Forums › Maui Support › Installation › wrong src list

Pages ({1}): « Previous 1 2 3
wrong src list
leszek Offline
Moderator
Joined: Jul 2013
Posts: 3,633
#21
12th January 2017, 13:16 (This post was last modified: 12th January 2017, 13:17 by leszek.)
Seems like libkf5kipi32.0.0 needs to be installed. Can you try that.
Also please use LC_ALL=C for all output to have english output (e.g. LC_ALL=C sudo apt-get install ...) and use quote or code tags for better readability
Find
Reply
smoreau Offline
Island Inhabitant
*****
Joined: May 2013
Posts: 294
#22
12th January 2017, 13:20
(12th January 2017, 13:16)leszek Wrote: Seems like libkf5kipi32.0.0 needs to be installed. Can you try that.
Also please use LC_ALL=C for all output to have english output (e.g. LC_ALL=C sudo apt-get install ...) and use quote or code tags for better readability

It is already. Where shall I put the LC_ALL=C command ?
Find
Reply
smoreau Offline
Island Inhabitant
*****
Joined: May 2013
Posts: 294
#23
12th January 2017, 13:24
The full command :
serge@serge-MacBookPro:~$ LC_ALL=C sudo apt-get install digikam -o "Debug::pkgProblemResolver=1"
Reading package lists... Done
Building dependency tree
Reading state information... Done
Starting pkgProblemResolver with broken count: 2
Starting 2 pkgProblemResolver with broken count: 2
Investigating (0) digikam [ amd64 ] < none -> 4:5.3.0-0neon+16.04+build11 > ( graphics )
Broken digikam:amd64 Depends on libmarblewidget-qt5-25 [ amd64 ] < none -> 4:16.08.2-0neon+16.04+build19 > ( libs )
Considering libmarblewidget-qt5-25:amd64 1 as a solution to digikam:amd64 9999
Reinst Failed early because of libastro1:amd64
Investigating (0) libkf5kipi32.0.0 [ amd64 ] < 16.12.0-0neon+16.04+build2 > ( libs )
Broken libkf5kipi32.0.0:amd64 Breaks on libkf5kipi31.0.0 [ amd64 ] < none -> 16.08.2-0neon+16.04+build18 > ( libs )
Considering libkf5kipi31.0.0:amd64 -1 as a solution to libkf5kipi32.0.0:amd64 -2
Removing libkf5kipi32.0.0:amd64 rather than change libkf5kipi31.0.0:amd64
Investigating (1) digikam [ amd64 ] < none -> 4:5.3.0-0neon+16.04+build11 > ( graphics )
Broken digikam:amd64 Depends on libmarblewidget-qt5-25 [ amd64 ] < none -> 4:16.08.2-0neon+16.04+build19 > ( libs )
Considering libmarblewidget-qt5-25:amd64 1 as a solution to digikam:amd64 9999
Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
digikam : Depends: libmarblewidget-qt5-25 but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
serge@serge-MacBookPro:~$
Find
Reply
leszek Offline
Moderator
Joined: Jul 2013
Posts: 3,633
#24
12th January 2017, 13:24 (This post was last modified: 12th January 2017, 13:27 by leszek.)
Can you try removing it then ? (see the e.g. for the command with LC_ALL=C)

PLEASE USE QUOTE OR CODE TAGS for not self written text like command output.
Find
Reply
smoreau Offline
Island Inhabitant
*****
Joined: May 2013
Posts: 294
#25
12th January 2017, 13:39
(12th January 2017, 13:24)leszek Wrote: Can you try removing it then ? (see the e.g. for the command with LC_ALL=C)

PLEASE USE QUOTE OR CODE TAGS for not self written text like command output.

Which one you want I remove ?
Find
Reply
leszek Offline
Moderator
Joined: Jul 2013
Posts: 3,633
#26
12th January 2017, 13:42
Can you please take a look at the sources.list and make sure maui-xenial-backports and maui-xenial-backports-neon are activated.
I fear that the update of maui-apt-config might've resetted this.
Find
Reply
leszek Offline
Moderator
Joined: Jul 2013
Posts: 3,633
#27
12th January 2017, 13:54
Also make sure to install digikam as following. The build2 is the one from our maui-xenial-backports-neon the build11 is the older one from maui-2-1-neon.
So you need build2 (this is a stupid cause as neon uses build11 and neon-lts upstream uses build2 and we want to use the lts for having the most stable desktop experience for our users)

Code:
LC_ALL=C sudo apt-get install digikam=4:5.3.0-0neon+16.04+build2 digikam-data=4:5.3.0-0neon+16.04+build2
Find
Reply
smoreau Offline
Island Inhabitant
*****
Joined: May 2013
Posts: 294
#28
12th January 2017, 14:11
leszekAlso make sure to install digikam as following. The build2 is the one from our maui-xenial-backports-neon the build11 is the older one from maui-2-1-neon.
So you need build2 (this is a stupid cause as neon uses build11 and neon-lts upstream uses build2 and we want to use the lts for having the most stable desktop experience for our users)


Code:
LC_ALL=C sudo apt-get install digikam=4:5.3.0-0neon+16.04+build2 digikam-data=4:5.3.0-0neon+16.04+build2

OK success Thanks very much leszek
Code:
serge@serge-MacBookPro:~$ LC_ALL=C sudo apt-get install digikam=4:5.3.0-0neon+16.04+build2 digikam-data=4:5.3.0-0neon+16.04+build2
Reading package lists... Done
Building dependency tree      
Reading state information... Done
The following additional packages will be installed:
 ffmpegthumbs libmarblewidget-qt5-26 marble-plugins
Suggested packages:
 digikam-doc
The following NEW packages will be installed:
 digikam ffmpegthumbs libmarblewidget-qt5-26 marble-plugins
The following packages will be DOWNGRADED:
 digikam-data
0 upgraded, 4 newly installed, 1 downgraded, 0 to remove and 0 not upgraded.
Need to get 79.1 MB of archives.
After this operation, 38.3 MB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://ds9-maui.s3-website.eu-central-1.amazonaws.com/maui-xenial-backports-neon xenial/main amd64 digikam-data all 4:5.3.0-0neon+16.04+build2 [67.9 MB]
Get:2 http://ds9-maui.s3-website.eu-central-1.amazonaws.com/maui-xenial-backports-neon xenial/main amd64 libmarblewidget-qt5-26 amd64 4:16.12.0-0neon+16.04+build2 [1856 kB]
Get:3 http://ds9-maui.s3-website.eu-central-1.amazonaws.com/maui-xenial-backports-neon xenial/main amd64 digikam amd64 4:5.3.0-0neon+16.04+build2 [8054 kB]
Get:4 http://ds9-maui.s3-website.eu-central-1.amazonaws.com/maui-xenial-backports-neon xenial/main amd64 ffmpegthumbs amd64 4:16.12.0-0neon+16.04+build2 [18.5 kB]
Get:5 http://ds9-maui.s3-website.eu-central-1.amazonaws.com/maui-xenial-backports-neon xenial/main amd64 marble-plugins amd64 4:16.12.0-0neon+16.04+build2 [1269 kB]
Fetched 79.1 MB in 26s (3035 kB/s)                                                                                    
dpkg: warning: downgrading digikam-data from 4:5.3.0-0neon+16.04+build11 to 4:5.3.0-0neon+16.04+build2
(Reading database ... 278916 files and directories currently installed.)
Preparing to unpack .../digikam-data_4%3a5.3.0-0neon+16.04+build2_all.deb ...
Unpacking digikam-data (4:5.3.0-0neon+16.04+build2) over (4:5.3.0-0neon+16.04+build11) ...
Selecting previously unselected package libmarblewidget-qt5-26.
Preparing to unpack .../libmarblewidget-qt5-26_4%3a16.12.0-0neon+16.04+build2_amd64.deb ...
Unpacking libmarblewidget-qt5-26 (4:16.12.0-0neon+16.04+build2) ...
Selecting previously unselected package digikam.
Preparing to unpack .../digikam_4%3a5.3.0-0neon+16.04+build2_amd64.deb ...
Unpacking digikam (4:5.3.0-0neon+16.04+build2) ...
Selecting previously unselected package ffmpegthumbs.
Preparing to unpack .../ffmpegthumbs_4%3a16.12.0-0neon+16.04+build2_amd64.deb ...
Unpacking ffmpegthumbs (4:16.12.0-0neon+16.04+build2) ...
dpkg: error processing archive /var/cache/apt/archives/ffmpegthumbs_4%3a16.12.0-0neon+16.04+build2_amd64.deb (--unpack):
trying to overwrite '/usr/lib/x86_64-linux-gnu/qt5/plugins/ffmpegthumbs.so', which is also in package kffmpegthumbnailer 2.1.0+p8+git20160507.0144
Selecting previously unselected package marble-plugins.
Preparing to unpack .../marble-plugins_4%3a16.12.0-0neon+16.04+build2_amd64.deb ...
Unpacking marble-plugins (4:16.12.0-0neon+16.04+build2) ...
Processing triggers for hicolor-icon-theme (0.15-0ubuntu1) ...
Processing triggers for libc-bin (2.23-0ubuntu5) ...
Processing triggers for desktop-file-utils (0.22-1ubuntu5) ...
Processing triggers for mime-support (3.59ubuntu1) ...
Processing triggers for man-db (2.7.5-1) ...
Errors were encountered while processing:
/var/cache/apt/archives/ffmpegthumbs_4%3a16.12.0-0neon+16.04+build2_amd64.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
serge@serge-MacBookPro:~$
Find
Reply
leszek Offline
Moderator
Joined: Jul 2013
Posts: 3,633
#29
12th January 2017, 14:17
Good to know.
Regarding the output kffmpegthumbnailer needs to go away for ffmpegthumbs to install successfully.
Sorry for the incovenience.
Thats a problem that slipped through our testing.
Find
Reply
« Next Oldest | Next Newest »
Pages ({1}): « Previous 1 2 3


  • View a Printable Version
  • Subscribe to this thread
Forum Jump:

  • Contact Us
  • Maui Forums
  • Return to Top
  • Lite (Archive) Mode
  • RSS Syndication
Current time: 21st November 2024, 14:48 Powered By MyBB, © 2002-2024 MyBB Group.
Linear Mode
Threaded Mode