[FYI] - Hardinfo / System Profiler & Benchmark.

[kdemeoz]

Hi. Just [re]discovered this GUI pgm, after a couple of years of forgetting about it. OMZ, it's really fabbo. Yes i know that a good CLI exponent would already be able to get a lot of this info in Konsole, but for GUI-preferrers like me, this is a really marvellous tool.

FYI:   sudo apt-get install hardinfo

[AJSlye]

There is also kinfocenter which should be installed by default.
However, I do like the benchmarking built into hardinfo.

I actually prefer I-Nex.
http://i-nex.linux.pl/install/

[kdemeoz]

Pls forgive the naivete or impoliteness of this question, but how can i know that PPA is trustworthy [now & into the future]?

[AJSlye]

It's maintained by the actual developers of the application.

[kdemeoz]

Aha, ok ta, well if you trust them then there's clearly no reason i should not do ditto. Will give it a try now! Thanks.

[kdemeoz]

Hmmm, oh dear; a bit anti-climactic:

Code:

Stable PPA:

sudo add-apt-repository ppa:i-nex-development-team/stable

sudo apt-get update

sudo apt-get install i-nex

   

[AJSlye]

That is strange, I will take a look in the morning.
I run this on my Arch and Ubuntu boxes, I haven't tried it on Maui yet.

[kdemeoz]

Ah, it's probably ok, ignore my last post (i think].

Code:

Z97-HD3:/home$ /usr/bin/i-nex.gambas

_IceTransSocketUNIXConnect: Cannot connect to non-local host moi-Z97-HD3
_IceTransSocketUNIXConnect: Cannot connect to non-local host moi-Z97-HD3
Qt: Session management error: Could not open network socket
[12/15/2016 13:53:06.367] [INFO] [Finfosys.Form_Open.50] Starting log
[12/15/2016 13:53:06.368] [INFO] [Finfosys.Form_Open.78] Check whereis inex-cpuid and get JSON Data
[12/15/2016 13:53:07.289] [INFO] [Finfosys.Form_Open.80] Decode JSON Data
[12/15/2016 13:53:07.294] [INFO] [Finfosys.Form_Open.82] Add Values CPUID
[12/15/2016 13:53:07.294] [INFO] [Finfosys.Form_Open.113] Create Labels ToolButtons TextLabels in ScrollView1
[12/15/2016 13:53:07.323] [INFO] [Finfosys.Form_Open.205] Check available procesors
[12/15/2016 13:53:07.323] [INFO] [Finfosys.Form_Open.225] /home/moi/.config/gambas3/i-nex.conf
[12/15/2016 13:53:07.324] [INFO] [Finfosys.Form_Open.226] /home/moi/.config/gambas3
[12/15/2016 13:53:07.324] [INFO] [Finfosys.Form_Open.229] Call to MInit for copy nedded files to I-Nex config dir in User.Home
[12/15/2016 13:53:07.324] [INFO] [MInit._inits.26] i-nex in home folder is exist
[12/15/2016 13:53:07.324] [INFO] [MInit._inits.27] Try to remove files
[12/15/2016 13:53:07.324] [INFO] [MInit._inits.36] Copy nedded files
[12/15/2016 13:53:07.324] [INFO] [MInit._inits.39] Copy gputemp from Data/gputemp to /home/moi/.i-nex/gputemp
[12/15/2016 13:53:07.324] [INFO] [Finfosys.Form_Open.231] Settings default dir = /home/moi/.config/gambas3
[12/15/2016 13:53:07.324] [INFO] [Finfosys.Form_Open.232] Check for Battery
[12/15/2016 13:53:07.324] [INFO] [Finfosys.Form_Open.234] Check for Usb device plugged
[12/15/2016 13:53:07.393] [INFO] [Finfosys.Form_Open.236] Check for Drives
[12/15/2016 13:53:07.393] [INFO] [Disk_Drives._inits.71] Add Drives to ComboBox
[12/15/2016 13:53:07.393] [INFO] [Finfosys.Form_Open.238] Check for Drives..
[12/15/2016 13:53:07.393] [INFO] [Disk_Drives._init_2.83] Add Drives to ComboBox..
[12/15/2016 13:53:07.393] [INFO] [Disk_Drives.get_informations.100] Deleting data from variables
[12/15/2016 13:53:07.393] [INFO] [Disk_Drives.get_informations.102] Get informations of Drives
[12/15/2016 13:53:07.394] [INFO] [Disk_Drives.get_informations.141] Get informations of Drives Done
[12/15/2016 13:53:07.402] [INFO] [Finfosys.Form_Open.240] Check for Drives....
[12/15/2016 13:53:07.402] [INFO] [Disk_Drives.get_informations.100] Deleting data from variables
[12/15/2016 13:53:07.402] [INFO] [Disk_Drives.get_informations.102] Get informations of Drives
[12/15/2016 13:53:07.402] [INFO] [Disk_Drives.get_informations.141] Get informations of Drives Done
[12/15/2016 13:53:07.408] [INFO] [Finfosys.Form_Open.242] Check for Input Drives
[12/15/2016 13:53:07.408] [INFO] [Input_Devices._inits.30] Add Input Devices to ComboBox..
[12/15/2016 13:53:07.411] [INFO] [Finfosys.Form_Open.244] Check available network devices
[12/15/2016 13:53:07.411] [INFO] [Network.inits.26] Add Network Devices to ComboBox
[12/15/2016 13:53:07.411] [INFO] [Finfosys.Form_Open.246] Check available graphic DSub, DVI etc
[12/15/2016 13:53:07.411] [INFO] [Finfosys.Form_Open.248] Call to Graphic
[12/15/2016 13:53:07.426] [INFO] [Finfosys.Form_Open.250] Check sound cards
Asound_Drives._get_informations.57: #45: File or directory does not exist
MStart.Main.63 

Unrelated to trying I-Nex, ~45' ago i had changed my Tower's hostname, from moi-Z97-HD3 to just Z97-HD3. Even though i ran the hostname command after, it appears that i'll need to reboot before again trying I-Nex. 

[kdemeoz]

Hmmm, nope, still won't run... after reboot, after removal & reinstallation ... same error. Now uninstalled it. It is not simply an incompatibility with Maui per se, as all these errors i mentioned occur in my "real" Maui, ie, on my Tower's SSD. Conversely, i tested it also in one of my Maui VMs, in which it ran just fine. Odd.

[AJSlye]

Looks like you found a bug, there seems to be a file or folder missing on your system that it is expecting.
Could you create an issue (bug report) here:
https://github.com/i-nex/I-Nex/issues