[Solved] - Tower's 1st [no, 3rd] Hard-Reset since clean-reinstall.

[AJSlye]

Yes, if this is on a system with two gpu's (one onboard and one discreet) that are not sli/cf, then this would be a multi monitor type of setup where both are active, and both would require a separate, or multiple separate monitors, depending on the setup your going for, and each gpu are capable of outputing to (ports available).

BTW, this is the board you have, yes?
http://www.gigabyte.com/Motherboard/GA-Z...-rev-10#ov